Other

HOTweezers  represent the state of the art in the design and construction of thermal wire strippers.

Hotweezers thermal wire strippers weigh less than 57g including cable and connector, making it an ideal hand-held solution with smooth and efficient operation. The heater filaments are completely sealed in the stripping head of a Hotweezers thermal wire stripper device enhancing its performance consistently.

Advantages of using HOTweezers:

1. The filament is resistant to oxidation.

2. The stripping head will not distort nor lose alignment as is the case with ordinary hot wire strippers.

3. Since the filaments are enclosed, a greater portion of the heat generated is retained to do useful work. Consequently the power supply can be much smaller than usual, and the current consumption is drastically reduced. The M-10 power supply consumes a mere 20 watts at the highest temperature setting.

4. Wire holes can be ground into the stripping head without damage to the filaments. With wire holes, the rotation of the stripper required to accomplish a strip is reduced from 180o to 15o and mashing of conductors, especially the finer gauges, is completely eliminated.

5. Because the filaments are an integral part of the stripper body, no maintenance is required.

Three different models of the HOTweezers are available to satisfy most stripping requirements. For precise insulation removal Models 4A and 4B have stripping holes to yield a clean, even strip free of insulation "tails" and to prevent mashing of the conductor strands. Model 4C is designed for use on cable jackets and larger diameter conductors. Maximum cable or conductor O.D. that can be stripped is 0.25 inch (6.35 mm) and maximum insulation wall thickness is .05 inch (1.27 mm). For stripping requirements that exceed these dimensions the HOTnife can be used. All models have the new strip length gauge so that repetitive stripping operations can be done accurately. The gauge is easy to adjust without a screwdriver or special tools. The standard power cord for all three models is a flexible, lightweight cable with a high temperature silicone rubber jacket that resists burns.

If you have a requirement that may require a special model, please contact us directly.

Image shows tweezer with power supply.

We are designers and manufacturers of cable and cable harness test equipment. We only sell products made by us and made in the UK. CableJoG Ltd. was registered in 2003 but has existed since 1996 as a product name. Designed, manufactured and sold by Eddie Zych (founder). Over the years we extended our range of continuity testers to meet the requirements of many different industries. Each product is designed carefully to meet the customers demanding requirements and have a long and productive life. We endeavour  to keep spare parts for all our testers so that should they need repairing we can do so at an economic rate.

We look forward to a long future of developing our existing range of testers and introducing exciting new ones to it.

Review Display Systems Limited is a specialist distributor of Flat Panel Displays, embedded and display systems. Representing some of the world's leading manufacturers of LCD, TFT, EL and Plasma Display technologies as well as industry leading Touch screens, display driver boards, Industrial PCs and keyboards.

Our new dedicated manufacturing suite is Certified to ISO 9001/2000 and our design and engineering team have over two decades of experience at designing and manufacturing bespoke display solution to meet individual customer needs.

Display Products

• LCD displays, passive alphanumeric and graphic modules
• Custom LCD design service
• Small TFT panels
• TFT colour displays, screens from 3.5 to 55 inches
• OLED displays (Organic Light-emitting Diode)
• EL panels
• E-INK panels

Support products

• Resistive touch screens
• Capacitive touch screens
• Touch screen controllers
• Display driver cards
• Industrial Single board computers
• Sealed Industrial keyboards
• Sealed Industrial track balls
• X-scale driver boards

System Products

• Panel PCs
• Display, driver kits
• Rugged industrial PC solutions
• Sealed rugged PCs
• Rugged touch monitors
• Rugged Tablets
• Custom system design service
  (Complete new designs or upgraded to exisiting systems.)

Manufacturers

Tianma/NLT, Palm technologies, AMT, Hampshire Company, Aaeon, Fujitsu Siemens, NSI, Technexion, Solomon Goldentek Display.

140 years of experience in connection technology and in particular with tools

World-wide, Klauke is renowned for its high-quality electrical connection technology and tools for crimping, cutting and punching. We offer special-purpose solutions for connection technology and tools to meet requirements in the most diverse industry sectors.

In total we offer more than 10,000 products for trade, industry and also the growth markets of renewable energies and modern infrastructure. Since 1996, Klauke has expanded its product portfolio with the Greenlee brand. With the focus on punching tools and cable management, Greenlee perfectly complements our own areas of competence

Express Assemblies Ltd is a global supplier of wire and cable assemblies and ISO 9001: 2015 accredited company which provides top quality, unbeatable performance and demonstrates excellence and professionalism in our vast range of products.

We are pleased to announce the launch of our brand new company www.expressassembliesltd.co.uk

After months of hard work the new and improved site demonstrates our numerous product capabilities, unbeatable service offerings and our dedication and commitment to the highest quality protocols.

Other features include integrated social media channels for Facebook, Twitter and LinkedIn which will be updated regularly and with interesting content helping to improve communication with our customers.

We hope you agree that the new website looks fresh and modern and that our hard work has paid off.

Thank you and should you have any enquiries please do not hesitate to contact us.

Established for over 35 years JPR Electronics are an independent electronics distributor offering a wide range of components and assemblies, with a highly flexible approach to our customers needs.

• Prices are amongst the most competitive available in the UK
• All products supplied from stock. Schedules and call-offs are welcome.
• Our full range of products can be viewed on our website. Orders can be placed online or by phone, fax or email for same day despatch.

Sinolec are a distributor of high quality electrical components since 2004, supplying our range of selected electro-mechanical components to businesses and consumers since 2004. Our main ranges include ; switches, IEC sockets, lighting components, circular connectors, fuses and thermal protection, potentiometers and battery isolator switches.