Pneumatic Tools
Pneumatic tools are any pieces of equipment powered by compressed air supplied by an air compressor or can be driven by carbon dioxide with a small cylinder for greater mobility. These tools are safer to operate and maintain than the electric-power equivalents and have a high power-to-weight ratio. This means that they can do heavier jobs despite their relatively light construction. Before deciding which to choose, the free speed, air pressure, air consumption and horse power must be considered. There are a huge variety of pneumatic tools. Probably the most well-known is the pneumatic drill but there are many others which are routinely used for building. These include nailing and stapling guns, sandblasters, air impact wrenches and ratchets. For more professional and specialised use, there are also buffers, riveting guns or machines and paint sprayers. There are a range of hammers types such as fabrication, forging, chipping or jack hammers. Only in recent years have pneumatic tools been purchased for domestic use but they are still not very popular. Traditionally, their use had been confined to construction sites and industry as their power allowed workers to use these implements to increase productivity especially for jobs requiring strength to be sustained for repetitive jobs.
-
Series 4 Ltd
View company profileHOTweezers represent the state of the art in the design and construction of thermal wire strippers.
Hotweezers thermal wire strippers weigh less than 57g including cable and connector, making it an ideal hand-held solution with smooth and efficient operation. The heater filaments are completely sealed in the stripping head of a Hotweezers thermal wire stripper device enhancing its performance consistently.
Advantages of using HOTweezers:
1. The filament is resistant to oxidation.
2. The stripping head will not distort nor lose alignment as is the case with ordinary hot wire strippers.
3. Since the filaments are enclosed, a greater portion of the heat generated is retained to do useful work. Consequently the power supply can be much smaller than usual, and the current consumption is drastically reduced. The M-10 power supply consumes a mere 20 watts at the highest temperature setting.
4. Wire holes can be ground into the stripping head without damage to the filaments. With wire holes, the rotation of the stripper required to accomplish a strip is reduced from 180o to 15o and mashing of conductors, especially the finer gauges, is completely eliminated.
5. Because the filaments are an integral part of the stripper body, no maintenance is required.
Three different models of the HOTweezers are available to satisfy most stripping requirements. For precise insulation removal Models 4A and 4B have stripping holes to yield a clean, even strip free of insulation "tails" and to prevent mashing of the conductor strands. Model 4C is designed for use on cable jackets and larger diameter conductors. Maximum cable or conductor O.D. that can be stripped is 0.25 inch (6.35 mm) and maximum insulation wall thickness is .05 inch (1.27 mm). For stripping requirements that exceed these dimensions the HOTnife can be used. All models have the new strip length gauge so that repetitive stripping operations can be done accurately. The gauge is easy to adjust without a screwdriver or special tools. The standard power cord for all three models is a flexible, lightweight cable with a high temperature silicone rubber jacket that resists burns.
If you have a requirement that may require a special model, please contact us directly.
Image shows tweezer with power supply.
-
Kilner Vacuumation Co Ltd
View company profileUK Manufacturer Est. 1964 – With over four decades experience providing all types of vacuum lifting equipment and components. All our products meet or exceed the latest British Standards and are fitted with the most comprehensive safety systems. We offer the ultimate in custom designed solutions as well as standard equipment. LOLER inspections & proof load testing service is available for all makes of equipment, modifications and upgrades. We provide training for vacuum lifting equipment both on site and at our factory.
Product Range :- Vacuum Beams & lifters for lifting steel plate, glass, stone, tube, sheet, coils, paper reels, board, panel, boxes, cartons, bags, sacks, drums, kerb & paving stones, concrete slabs & much more. Pneumatic balancer manipulators, mobile or fork mounted equipment. Lifters with 90°, 180° & 360° rotation.
User Benefits
- LIFT IN SAFETY
- PREVENT BACK INJURY
- MEET HEALTH & SAFETY REQUIREMENTS
- ELIMINATE PRODUCT DAMAGE
- INCREASE PRODUCTIVITY
- IMPROVE WORKING CONDITIONS
- AUTOMATE PRODUCTION
-
Gustav Klauke GmbH
View company profile140 years of experience in connection technology and in particular with tools
World-wide, Klauke is renowned for its high-quality electrical connection technology and tools for crimping, cutting and punching. We offer special-purpose solutions for connection technology and tools to meet requirements in the most diverse industry sectors.
In total we offer more than 10,000 products for trade, industry and also the growth markets of renewable energies and modern infrastructure. Since 1996, Klauke has expanded its product portfolio with the Greenlee brand. With the focus on punching tools and cable management, Greenlee perfectly complements our own areas of competence
