LMK Thermosafe Ltd

These units are manufactured with our high-density inert fibreglass insulation and can be used to keep drums warm or cool, by slowing down temperature changes / responses to the local ambient temperature. Ideal for projects that need to keep one drum warm while a second is being heated with one of our Flexible Heating Jackets or Induction Heaters.

The Insulation Jackets (product code: IJ2D) can also be used around a drum whilst being heated with a Base Heater. This minimises heat-loss to improve efficiency and potential heating rates.

For more information contact LMK Thermosafe today- email: sales@drumheating.com, Tel: +44 (0)1440 707141

Our 200L PVC heavy-duty cover provides waterproof protection for a Flexible Heating Jacket where a customer’s drum is positioned outside, open to direct rain, or in a potentially wet environment.

For more information contact LMK Thermosafe today- email: sales@drumheating.com, Tel: +44 (0)1440 707141

We offer three main design types of Flexible Heating Jacket for standard 200/210L drums in safe non-hazardous environments: Standard, HiHeat and High Power.

The Standard range

• Ideal for gently heating and maintain a temperature up to approximately 40-45°C.
• Polyurethane coated black nylon is used on both sides of the jacket (inner and outer) to ensure maximum wear resistance.
• Needled felt polyester insulation provides perfect insulation.

The HiHeat range

• Provides a boost in power for applications needing a faster heat-rate up to approximately 60-70°C.
• Black nylon fabric for the outer layer.
• High-temperature silicone-coated glass-cloth inner layer.
• Increased insulation is provided by stitchbonded glassfibre mat.

The High Power range

• Maximum power and maximum insulation.
• Special formulated high-temperature, chemically resistant silicon-coated glass-cloth used on both sides of the jacket to extend product life in demanding applications.
• Very high density stitchbonded glassfibre mat is used as insulation to provide safe and efficient use even at the highest temperatures.
• 0-160°C thermostat available (apart from HPD1 model)

For more information contact LMK Termosafe today.

Safe heating of 200L drums (steel and plastic), even in hazardous areas

Ideal for gentle warming and to avoid winter freezing

LMK Thermosafe are pleased to present their hazardous area range of heating jackets for 200L drums. These ATEX and IECEx  Zone 1, 2, 21 and 22 rated jackets use a completely new and proprietary design.

They are constructed with custom elastomer and silicone coated glass cloth materials and high density fibreglass insulation. Safe operating conditions are maintained even in the presence of potentially explosive gases and dusts. No transformers are required as they operate using standard ac supply voltages.

InteliHeat Flexiplus jackets are ideal for gentle warming and to avoid winter freezing. For faster heating rates and melting solids at higher temperatures, the Thermosafe Induction Heater is normally recommended, but we can also offer more powerful custom jacketed solutions with digital jacket and wall-mounted controllers.

The InteliHeat Flexiplus range is designed for use with plastic, stainless steel or magnetic steel drums.  An LMK Insulated lid may be used in certain situations to reduce heat loss and improve heating times. Certified jackets to fit other sizes, shapes and styles of container are also available. 

For more information or a No obligation quote contact LMK Thermosafe today.

Safe heating of containers, even in hazardous areas

Ideal for gentle warming and to avoid winter freezing

LMK’s Thermosafe are pleased to announce their hazardous area heating jackets for 25, 50 and 100 Litre containers. These ATEX / IECEx Zones 1, 2, 21 and 22 (T4 and T3) rated heating jackets are ideal for gentle warming or to avoid winter freezing.

They are constructed with a silicone coated glass cloth outer and high density fibreglass insulation. Safe operating conditions are maintained even in the presence of potentially explosive gases and dusts. No transformers are required as they operate using a standard 240v ac supply.

The jackets are suppled either as self-limiting designs (20-50℃ above the ambient temperature when operated at 240v) which will maintain a temperature on the drum wall, with adjustable jacket-mounted temperature regulators (range dependent on zone temperature classification), or with digital jacket and wall-mounted controllers.

Other sizes of heating jacket for other containers are also available. Please contact LMK Thermosafe for more information.

For more information or a no-obligation quote, contact LMK Thermosafe today- email: sales@drumheating.com, Tel: +44 (0)1440 707141

We offer three ranges of Flexible Heating Jacket for standard sizes 25L up to 205L drums: Standard, HiHeat and High Power.

The Standard range

• Ideal for gently heating and maintaining temperatures up to approximately 40-45°C.
• Polyurethane coated black nylon is used on both sides of the jacket (inner and outer) to ensure maximum wear resistance.
• Needled felt polyester insulation provides perfect insulation.

The HiHeat range

• Provides a boost in power for applications needing a faster heat-rate up to approximately 60-70°C.
• Black nylon fabric for the outer layer.
• High-temperature silicone-coated glass-cloth inner layer.
• Increased insulation is provided by stitchbonded glassfibre mat.

The High Power range

• Maximum power and maximum insulation.
• Special formulated high-temperature, chemically resistant silicon-coated glass-cloth used on both sides of the jacket to extend product life in demanding applications.
• Very high density stitchbonded glassfibre mat is used as insulation to provide safe and efficient use even at the highest temperatures.
• 0-160°C thermostat available

For more information contact LMK Thermosafe today.

LMK Thermosafe Ltd have been manufacturing Induction Drum Heaters using specialist chemically resistant resins for over 30 years, so are very familiar with the technical challenges of delivering high quality finished GRP products for use in harsh environments.

The marine and aeronautical industries use fibre reinforced resins, laminates and gelcoats in many applications where durability, finish and quality go hand in hand. Our flexible heating jackets have been utilised for surface curing during product assembly and where any post-production work results in the need for re-finishing. Applications vary from insurance quality repairs to luxury yachts, through surface curing of wind turbine blades during manufacture and re- finishing of blade tips during maintenance. Composite structures assembled in the construction of commercial and military aircraft often require surface heating. The high density insulation used throughout our products ensures a very evenly distributed heat is delivered, and the flexibility of the jacket permits uneven surface to be thoroughly cured. Sensors can be embedded where necessary for logging. We manufacture custom sizes and shapes, so with your drawings, images and temperature requirements we would be pleased to work out a solution and pricing without obligation.

For more information on  Curing Composites, Resins & Laminates  talk to  LMK Thermosafe Ltd

• Tailored design and manufacture to fit virtually any size or shape

• Many power, voltage, material and control options available

• All products manufactured to short lead-times

• Indoor and Outdoor styles

• Can be designed to meet UL/CSA standards, ATEX, IECEx etc.

LMK Thermosafe Ltd manufacture a wide range of drum and container heating products used in process industries world-wide, including Flexible Heating Jackets in a variety of sizes, materials, power levels and voltages.

The Flexible Heating Jackets are so versatile that they can be specifically tailored to fit a multitude of different containers suitable for virtually any size and specifications. This tailored service offers ideal solutions for customers requiring non-standard containers to be heated as rapidly as possible and efficiently insulated.

Outer surfaces of each jacket utilise tough, water resistant nylon materials, inner layers are manufactured using unique coated glass cloths for protection from chemicals and long-term temperature durability. All heating jackets utilise high efficiency insulation to reduce heat-loss to a minimum, therefore we can also provide unheated insulated covers to fit containers where electrical power is not required or not available.

For heating solutions in hazardous areas, we can offer products certified to ATEX / IECEx or UL/CSA standards. A number of different zone / division ratings are available depending on the application.

However big or small the application, our development team based at our UK headquarters can adapt tried and tested designs to produce the best results. A wide standard range is available from stock to fit 25, 50, 100 or 205 litre drums as well as 1000 litre IBC containers and totes. Heating Jackets are also available for special gas cylinder applications.

Fo more information or for a no-obligation quote, contact LMK Thermosafe today.

Safe heating of containers in hazardous areas

Custom sizes to fit most containers and vessels

LMK Thermosafe are fully certified and approved to design and manufacture hazardous area heating jackets to fit non-standard container sizes. These ATEX / IECEx Zones 1, 2, 21 and 22 rated heating jackets can be designed to specifically fit containers that don’t fall within our standard range of heating jackets.

They are constructed with a silicone coated glass cloth outer and high density fibreglass insulation. Safe operating conditions are maintained even in the presence of potentially explosive gases and dusts. No transformers are required as they operate using a standard single-phase 50/60Hz supply, and can be designed for voltages of 110-240v. Different zone temperature classifications are available.

In most circumstances custom heating jackets are supplied with either a jacket, wall or roving stand-mounted ATEX / IECEx certified digital temperature controller. There are a number of digital controllers available for different operating requirements, but they all allow the user to set and clearly display the operating temperature of the heating jacket. The units can also include additional alarms, outputs, and control features.

Please contact us with details of your container size and heating requirements for a custom quotation.

Provides heat to the base of 210 litre drums and smaller containers.

May be used on its own, or with other LMK Heating products.

Digital indicating thermostat standard.

The Digiheat Base Heater is suitable for heating steel or plastic drums up to 210 litres, including smaller containers. Top plate temperatures can be set and clearly displayed on the integral microprocessor temperature controller.

The Digiheat may be used by itself to provide heat to the base of a drum, or alternatively it can be used in conjunction with our other products such as flexible heating jackets to reduce heating times.

When using our THERMOSAFE® Induction Heater in a normal industrial area to melt a wax with poor thermal properties, the addition of a Digiheat significantly reduces the time required. A reduction of 45% in the time taken for all the contents of a drum to reach 80℃ and be completely melted has been demonstrated.

For more information contact LMK Thermosafe today.