Other

Ecopac Power Ltd is a major European distributor of Power Supplies, Chargers DC/DC Converters and much more...

Established 14 years ago Ecopac Power Ltd is the largest Mean Well distributor in Europe. In partnership with Mean Well, Ecopac Power provides power supplies to the European and UK markets. From External Power Supplies to Open Frame Power Supplies, LED Power Supplies and Drivers, DIN Rail Power Supplies to Battery Chargers, DC-DC Converters to DC-AC Inverters, AC/DC Converters to Enclosed Power Supplies. Our objective is to continue to offer excellent products with outstanding value for money.

HOTweezers  represent the state of the art in the design and construction of thermal wire strippers.

Hotweezers thermal wire strippers weigh less than 57g including cable and connector, making it an ideal hand-held solution with smooth and efficient operation. The heater filaments are completely sealed in the stripping head of a Hotweezers thermal wire stripper device enhancing its performance consistently.

Advantages of using HOTweezers:

1. The filament is resistant to oxidation.

2. The stripping head will not distort nor lose alignment as is the case with ordinary hot wire strippers.

3. Since the filaments are enclosed, a greater portion of the heat generated is retained to do useful work. Consequently the power supply can be much smaller than usual, and the current consumption is drastically reduced. The M-10 power supply consumes a mere 20 watts at the highest temperature setting.

4. Wire holes can be ground into the stripping head without damage to the filaments. With wire holes, the rotation of the stripper required to accomplish a strip is reduced from 180o to 15o and mashing of conductors, especially the finer gauges, is completely eliminated.

5. Because the filaments are an integral part of the stripper body, no maintenance is required.

Three different models of the HOTweezers are available to satisfy most stripping requirements. For precise insulation removal Models 4A and 4B have stripping holes to yield a clean, even strip free of insulation "tails" and to prevent mashing of the conductor strands. Model 4C is designed for use on cable jackets and larger diameter conductors. Maximum cable or conductor O.D. that can be stripped is 0.25 inch (6.35 mm) and maximum insulation wall thickness is .05 inch (1.27 mm). For stripping requirements that exceed these dimensions the HOTnife can be used. All models have the new strip length gauge so that repetitive stripping operations can be done accurately. The gauge is easy to adjust without a screwdriver or special tools. The standard power cord for all three models is a flexible, lightweight cable with a high temperature silicone rubber jacket that resists burns.

If you have a requirement that may require a special model, please contact us directly.

Image shows tweezer with power supply.

With a wealth of experience, Perancea is able to provide custom and standard enclosures to meet the exacting needs of a broad range of application requirements from mechanical to electrical and electronics engineering solutions. The company is also a highly experienced mechanical engineering organisation, specialising in the production of all types of enclosures including RFI/EMI shielding solutions and plastic and metal fabrication for the electrical, electronics and associated industries. 

                                                                                                      Perancea: A myriad of electronic packaging solutions

 

 

At Zouch Converters, we are proud to be able to offer the most extensive range of high-performance adhesive tapes, foams and sealants across the world. Alongside our own flawless, premium products we source materials from the best manufacturers in the world. Using a consultative approach, we’ve built strong, trusted partnerships with some of the biggest brands and organisations worldwide and will continue to do so as we grow from strength to strength.

Delivering impeccable results for our clients from off-the-shelf components to bespoke design and development we cater to almost all industries from aviation and automotive to construction, healthcare and HVAC. With more than thirty years experience as industry leaders, the very latest in application technologies and unparalleled access to the most advanced materials on the market, whatever your goal is, we’re here to help you reach it.

Plastic Turned Parts - That's exactly what we do!

We're the specialists in plastic parts because we only deal in plastic

Computerised machinery means that we supply precision turned parts using the latest in CNC technology and all our work is carried out by highly qualified and experienced engineers.

Plant includes:

Citizen B16
Citizen B20
Citizen K16
Citizen L20
Citizen A32
Miyano BNA42S
CMZ TB46M
Daewoo Lynx 220C
Haas Mill TM1

Using the above machinery we produce all of our Plastic Turned Parts in-house, we will not subcontract your parts out to a 3rd party. You can be assured every time you call us or send us an enquiry/order you are dealing directly with the manufacturer.

We also have extensive manual machining facilities and the provision to produce our own tooling

We're ISO9001 approved and members of the BTMA

If you're looking for a specialist who can offer competitive pricing and the highest quality contact us today.

Sheet metal work

V and F Sheet Metal are a UK Hampshire based sheet metal fabrication, sheet metal work and sub-contract engineering company. We provide sheet metal manufacturing services including CNC punching, CNC laser cutting, CNC bending, welding and press work. Using the latest CAD/CAM software modelling for the best accuracy and speed of sheet metal blank development for our in house CNC punching and CNC laser cutting processes. Supporting a wide range of industries in the UK from electronics to lighting, heating and audio.

Established in Fareham, Hampshire in 1985, with the ability to handle engineering projects from one off small batches of bespoke sheet metal work to high volume power press work V and F Sheet Metal are flexible enough to offer you the complete sub-contract sheet metal fabrication service for your growing company.  Regular deliveries to Portsmouth, Southampton, Winchester, Eastleigh, Andover, Basingstoke and other towns in Hampshire from our factory in Fareham is easy. Over-night pallet and small package deliveries right across the UK for those who need it is offered to ease sheet metal component supply.

We have grown to a size where we can offer a complete sub-contract sheet metal fabrication and sheet metal work service to our customers right across the UK. This can include advice on the suitability of sheet metal work designs for manufacturing, sub-assembly work or sub-contract finishing and treatments to your specification e.g. zinc plating, alocrom 1200 / 1000, iridite NCP, surtec 650, silver and black anodising, powder coating, wet painting and screen printing. Continually investing in the latest CNC manufacturing equipment and CAD/CAM software enables us to offer the best combination of quality and price to suit your sub-contract engineering and sheet metal fabrication requirements.

We have a long history of working with UK based lighting companies to reduce their sheet metal fabrication costs and improve the quality of their sub-contract engineering/sheet metal work projects.  With many standard CNC punching tools and material set-up costs can be kept to a minimum when considering new sheet metal fabrication projects.

• Sheet Metal Enclosures and sheet metal housings for the electronics industry
• Reflectors and sheet metal fabrications for the UK lighting industry
• Sheet Metal Perforated Ventilation and Speaker grilles for the heating and audio industries
• Front panel electronics and rack mount sheet metal work
• Welded assemblies - thin gauge to 6mm sheet metal fabrications in ferrous and non-ferrous materials
• CNC punching using Trumpf CNC punch presses
• CNC laser cutting with our Trumpf 3030 3KW fibre laser cutting machine
• CAD/CAM processes supported by Radan 3D and 2D software to aid CNC punching and laser cutting
• Sheet Metal CNC bending up to 3.0M long (7 press brakes), including 3 Trumpf 7036 CNC press brakes and a 3M Safan e-Brake CNC press brake
• Tig, Mig, Gas, Spot and Stud sheet metal fabrication welding capacity
• Power press sheet metal work up to 50 tons with custom press tools

Where can I get sheet metal work?  Look no further if you are looking for CNC punching, CNC laser cutting, CNC bending and other sheet metal working processes:

For further information and to discuss your personal sheet metal project requirements call us on 01489 577786.

For more information about sheet metal please visit this page What is Sheet Metal Work and how is it made?

Gemma Lighting Ltd are an innovative, energy conscious and environmentally friendly LED Street Light Manufacturer.

From their UK manufacturing facility in Portsmouth, Gemma Lighting draw on their vast LED Lighting experience which dates back to 2003. Their products are equipped with the latest technology in high brightness LED's and they can provide energy efficient lighting solutions for all of your requirements which also includes Cold Store Lighting.

As an LED Street Light Manufacturer, Gemma Lighting have designed a series of LED Street Lights which offer significant carbon and energy reduction.

At Compass Protection Manufacturing Ltd, we specialise in providing protective crash barriers and offer a full installation service. We supply Armco-type crash barriers, the most widely used crash barriers. They are frequently seen on motorways, around private building and carparks, and alongside private roads.

The Keystone Castor Company is the largest and best-known distributor of Industrial Castors and Wheels in the United Kingdom.

Established in Birmingham for over 80 years, we have castor warehouses and sales offices in Birmgham and Manchester,

We focus exclusively on sourcing and stocking castors and wheels because we are serious about meeting our customers' expectations through keeping large stocks across a vast range of products. Such as:

Swivel Castors	Shock Absorbing Castors
Braked Castors	High Temperature Castors
Fixed Castors	Jacking Castors
Light Duty Castors	Nylon Wheels
Medium Duty Castors	Rubber Tyre Wheels
Heavy Duty Castors	Cast Iron Wheels
Extra Heavy Duty Castors	Steel Wheels
Pressed Steel Castors	Polyurethane Tyre Wheels
Fabricated Steel Castors	Antistatic Wheels
Stainless Steel Castors	Elastic Rubber Tyre Wheels
Synthetic Castors	Flanged Wheels
Medical Castors	V-Grooved Wheels
Industrial Castors	Pneumatic Wheels
Footmaster Castors	Institutional Castors
Cargo Castors	Furniture Castors

We are a small metal stockholding company near Milton Keynes which was set up in 1985 and we specialise in selling Steel and Non-Ferrous Metals in a vast range . see our web shop.

We also sell engineering tools and have a fabrication service see services. Metallurgical Services

• STEEL SHEET
• ALLOY STEEL HEAT TREATABLE
• ALUMINIUM ANGLE
• ALUMINIUM CHANNEL
• ALUMINIUM FLATS
• ALUMINIUM HEXAGONS
• ALUMINIUM PLATE
• ALUMINIUM ROUNDS
• ALUMINIUM SHEET
• ALUMINIUM SQUARE TUBE
• ALUMINIUM SQUARES
• ALUMINIUM TEE
• ALUMINIUM TUBES
• BLACK STEELS
• BRASS SHEET
• BRASS ROUNDS
• BRASS SQUARE TUBE
• BRASS ANGLE
• BRASS CHANNEL
• BRASS FLATS
• BRASS HEXAGONS
• BRASS PLATE
• BRASS SQUARES
• BRASS TUBES
• BRIGHT ANGLE
• BRIGHT STEEL ROUNDS F/C
• BRIGHT STEEL FLATS
• BRIGHT STEEL HEXAGONS
• BRIGHT STEEL LOW CARBON ROUNDS
• BRIGHT STEEL ROUND MED CARBON
• BRIGHT STEEL SQUARES
• BRONZE FLATS
• BRONZE HEXAGONS
• BRONZE PLATE
• BRONZE ROUNDS
• BRONZE SQUARES
• BRONZE TUBE
• CAST IRON
• CASTING METALS
• CHAIN
• COPPER FLATS
• COPPER ROUNDS
• COPPER SHEET
• COPPER SQUARE
• COPPER TUBES
• CUTTERS
• DIES
• DRILLS
• GROUND FLAT STOCK
• GROUND STEEL BARS
• MISCELLANEOUS ITEMS
• MODEL METALS
• NEW PARTS AND MACHINERY
• NICKEL SILVER
• PLASTICS
• RIVITS
• SAFETY EQUIPMENT
• SCREWS
• SEAMLESS STEEL TUBES
• SILVER STEEL
• SPECIALS
• SPRING STEEL
• STAINLESS FLATS
• STAINLESS ANGLE
• STAINLESS HEXAGONS
• STAINLESS ROUNDS
• STAINLESS SHEET
• STAINLESS SQUARES
• STAINLESS TUBES
• STUDDING
• TAPS
• TITANIUM
• TOOLS
• WELDED STEEL TUBE

As a bonding fastener and threaded insert designer and manufacturer, Veck Composite Fasteners stock thousands of male and female bonding fasteners.

Our supplies of corrosive resistant bonding fasteners can be provided in small or large quantities and are ideal for many applications and environments.

Moore International started in 1997 delivering bearings and drive belts around the towns and villages of Dorset. From these humble beginnings the company has grown into the UK’s leading distributor of leadscrews, ballscrews, linear rail and carriages and is the sole distributor in the UK of Swiss-made products by Eichenberger Gewinde. The company is also a key distributor of Schneeberger linear bearings, rail and positioning systems. Across the entire product range, Moore International now has clients in industries including defence, automation and medical instrumentation. We also have the capability within our workshop to carry out custom designs, by using our CNC Milling and Turning Machines.

 

 

 

Established in 1770 Heaps, Arnold & Heaps Ltd are the UKs leading manufacturer of Lead, Tin and Solder Products.

We offer a wide and diverse range of extruded, cast, machined and engineered lead products, including:

• Lead Ballast/Lead Counterweights
• Lead Sash Weights
• Steel Sash Weights
• Lead Radiation Shielding
• Chrome Plating Anodes
• Tin Plating Anodes
• Plumbing Solders
• Lead Came

Heaps, Arnold & Heaps Ltd offer a tool & mould making facility, enabling us to undertake any extrusion or casting project on a one off basis or large volume runs.

Titan Technologies Ltd is based in Washington, Tyne and Wear and specialise in the supply and refurbishment of all types of Hydraulic equipment, on a  local, national and international level. We are suppliers of Rexroth Bosch products, covering both their hydraulic and pneumatic product ranges.

• Hydraulic Systems Capability
• In-House Design and Manufacture
• Installation
• On-Site Fault Finding
• Repairs/Testing
• Contamination Control
• On-site Fluid Sampling
• Component Supply
• Major Product Brand Supply
• Hydraulic Cylinder Manufacture AND Repair
• Hydraulics, Pneumatics, Systems Design, Manufacture, Commissioning, Service, Repair.

FOR OUR FULL RANGE OF REXROTH BOSCH PRODUCTS PLEASE CLICK HERE

Titan Fluid Technologies Ltd has a clear focus on engineering excellence and quality added services. We specialise in the design, build, installation, commissioning and repair of both hydraulic and pneumatic control systems, and the supply of associated components.

As a company we have established an excellent reputation based upon a high level of technical expertise, integrity of product quality, and the ability to respond quickly to our customers varied requirements. We have first hand experience of supply application solutions and complete systems to OEM customers in the Offshore, Marine, Machine Building, Power Generation, Automotive, Defence, Waste Paper and Petrochemical Industries.

Our product portfolio includes The Rexroth Bosch Group, Hydac, Flupac, Fawcett Christie, Ace Controls, koganei and our own branded Titan Cylinders.

FLEXIFAST CAPILLARY  -   Available in sizes 2 and 4mm, three colours (black, blue or red - to safely differentiate between the high and low side of systems) and with the world's widest range of premium quality fittings it's no wonder that FLEXIFAST CAPILLARY is the WORLD'S GREATST CAPILLARY HOSE system and fast becoming the industries favourite and benchmark.

*** NEW LAUNCH *** FLEXIFAST CAPILLARY AMMONIA COLLECTION  -   with our new range of stainless fittings we are glad to confirm that FLEXIFAST CAPILLARY is fully compatible with ammonia and we believe that we are the first in the world to provide an ammonia compliant flexible capillary hose system

As we are constantly developing this incredible product, we are very pleased to work with clients to develop bespoke applications for their individual needs - we have THE SOLUTION.

 

Vital Parts Ltd are a UK based Plastic, Rubber & Metal Components Manufacturer and Distributor with their head office based in Maidstone, Kent. Supplying a wealth of components both nationally and internationally, to all kinds of Industries from Construction to Education, they are the go to company for anything component related..

As a Manufacturer & Distributor we have the ability to offer a truly vast range of standard products through our ecommerce website, along with bespoke Custom Moulding Services (and secondary finishing) also available upon request, covering the following processes:

• Injection Moulding
• Rotational Moulding
• Over Moulding
• Dip Moulding
• Extrusions

Holding stock of over 1 million different components we are held in high regard amongst both consumers and industry professionals for our quick and reliable turn-around, with next day delivery and free delivery services available through our ecommerce website. Learn more about us as a company, by visiting our About Us page today! Or leave us a message on our Contact Us page! We also have support and advice available through our friendly Live Chat, which is accessible during office hours by clicking on the bottom right of our website.

Free Delivery On Orders £30+ | Free Samples Available | Bulk Discounts 

 

We produce special fasteners and are an experienced precision engineering business. We manufacture special fasteners and machined components for critical applications where total product confidence and reliability is of utmost importance.

Our core expertise is the manufacture of special fasteners and bespoke fasteners from high performance alloys and exotics such as inconel fasteners, hastelloy, monel, 17/4PH, hiduron, nimonic marinel, aluminium bronze, phosphor bronze duplex and super duplex 31803 and 32760, and rare alloys such as 32750 and 316Ti.

For all your special fastener requirements, we provide unmatched service.

We have over 30 years experience of supplying specialised products for the hardware, DIY, building and furniture manufacturing sectors. We supply screws and screw packs at highly competitive prices. Our aim is to offer a refreshing and flexible approach to supply systems. 

Our screw packs suit the majority of our customer's requirements and our products include cross recess and slotted hardened twin threads and chipboard, traditional slotted screws, raised and round in steel and brass screw cup washers, turned sockets, cover caps and plugs, mirror, decking, self tapping, and machine screws.

Offering a comprehensive range of commercial catering equipment and supplies from market leading brands, we guarantee high quality at great prices. Whatever you're searching for, from commercial ovens, fryers or microwaves to warewashers, clothing or kitchen utensils, we have the perfect product to suit all demands.

FFD Catering Equipment is a subsidiary company of Fridge Freezer Direct Ltd. a business specialising in the supply of commercial refrigeration to the catering and hospitality sector. Now branching out into catering equipment, our knowledgeable sales team and dedicated customer service bring years of experience, guaranteeing you are in safe hands every time you shop.

Our aim is to deliver the widest range of products at the best possible prices ensuring that every business can benefit from superior quality and professional performance, whatever the budget. FFD Catering Equipment is fully ISO compliant, meaning that our customers are guaranteed safety and security during every stage of the shopping process.

Established over 25 years ago we are still supplying & Installing Genuine Dexion products all over East Anglia including; Suffolk, Norfolk, Cambridgeshire & Lincolnshire .

At our warehouse based in the heart of Kings Lynn, Norfolk we hold a vast amount of Dexion Products which is growing on a weekly basic. This is set up to showcase the various Dexion Products in a storage environment. Dexion P90 Adjustable Pallet Racking is one of the UK and Europe's leading pallet racking system, with the ability of storing heavy loads and on a fast turn-around. 

Over the years we have worked tirelessly to ensure we provide a professional & safe service to thousands of customers including: NHS, Police Authorities, Ministry of Defence and large food processing companies.

Our experienced sales staff are on the road covering East Anglia and through the UK looking at projects of all sizes, as well as our trained office based staff answering all enquiries and handling orders.